Our Lab (Boelter 6514)
This is where a lot of people within our organization work, hang out, and relax.
We have two areas: a workshop with all our printers, tools, paint, etc... and our lounge area with music, board games, and tea!
How to get there
Boelter 5th Floor Directions
Cartographer's guide to Boelter Hall
CAT: LOST-2026
DATE: SEP '26
BY: Maxime M.
REV: A
| STEP | DIRECTIONS |
|---|---|
| 001 | Enter the main building entrance. You will see a diorama of the building. |
| 002 | Take a right to the elevator. Go to the 6th floor. |
| 003 | Take a left and go down the hallway. |
| 004 | Enter the room with our logo and say hi! |
Boelter 3rd Floor Directions
Cartographer's guide to Boelter Hall
CAT: LOST-2026
DATE: SEP '26
BY: Maxime M.
REV: A
| STEP | DIRECTIONS |
|---|---|
| 001 | Descend the stairs near math and science and walk down the pathway, taking the first door to your left. |
| 002 | Take the elevator to the 6th floor. |
| 003 | Turn right and go down the hallway. |
| 004 | Enter the room with our logo and say hi! |
Our lab space is free to access, free to use, and has ample space for anyone to work in.
We have access to paints, sandpaper, printers, and other tools for all your project needs. And we also have a lounge next to our workshop, where we hang out, host events, and chill after a long day's work.
For safety purposes, do not bring items from one room to another.
Click one of the guides either above or to the left to find out how to get here.
Our Arsenal
YVELTAL
Voron 2.4
Type: FDM | Vol: 350x350x330mm
Yveltal is one of the largest 3D printers at UCLA accessible to students, built by hand from prior members.
Supported Materials:
ABS
PETG
TPU
PLA
XERNEAS
Sovol SV08
Type: FDM | Vol: 350x350x345mm
Xerneas' design is heavily inspired by the Voron 2.4. Our model is enclosed, and has better part cooling than default.
Supported Materials:
ABS
PETG
TPU
PLA
PANCHAM
Bambu Labs P1P
Type: FDM | Vol: 256x256x256 mm
An unenclosed, very reliable, and speedy printer,
but a little finicky as it does not live within our opensource ecosystem.
Supported Materials:
PETG
TPU
PLA
ODDISH
Ender 3
Type: FDM | Vol: 220x220x250mm
Relic from a past age. Makes one feel nostalgic almost. Kept for when print volume is necessary during peaks. We are currently trying to repurpose this into a Duender.
Supported Materials:
PETG
PLA
GENGAR
Ender 3 Pro
Type: FDM | Vol: 220x220x250mm
Another relic from a past age, this time in purple. Kept for when print volume is necessary during peaks. We are currently trying to repurpose this into a Duender.
Supported Materials:
PETG
PLA
LITTEN
Prusa Mk. 2
Type: FDM | Vol: 250x210x200mm
Final relic from a past age, in beautiful Prusa Orange. Kept for when print volume is necessary during peaks and when other printers require emergency parts.
Supported Materials:
PETG
PLA
ROTOM
Heygears Reflex
Type: SLA | Vol: 222x122x228mm
UV Printer accessible to only Board Members to print on due to safety. High resolution small models work best with it.
Supported Materials:
UV curable Resin (BYO)